Universal Safety Anchor by Metal Plus

$199.00

The Universal Safety Anchor provides a fall protection tie-off location anywhere on the metal roof you need it.

9 in stock

x

Description

The Universal Safety Anchor by Metal Plus, LLC was designed to allow fall protection safety tie-off on standing seam metal roofs without causing damage to the roof panel.

The simple yet robust design features a simple clamping mechanism that is simply placed over the panel rib, tightened with a socket wrench, then torqued to 70ftlbs.

Once installed according to the included instructions, the Universal Safety Anchor provides a tie-off location anywhere on the metal roof you need it and meets OSHA 1926.502 (d) (2) (3) (4) (15) and OSHA 1910.140.

This anchor has been tested to ANSI Z359.18-2017 and test results are readily available: ANSI Z359-18-2017 TEST REPORT for UNIVERSAL SAFETY ANCHOR FEATURES:

  • Installation in less than a minute
  • No set screws to adjust. Place, tighten and torque and you are done.
  • No damage caused by set screws because there are none!
  • Fits over panels up to 1-1/4″ wide (Do not use on wide batten cap panels)
  • Panel Warranties don’t get voided
  • Meets OSHA 1926.502 (d) (2) (3) (4) (15) and OSHA 1910.140
  • Tested to ANSI Z359-18-2017
  • ISO Tested: ANSI/ASSE Z359.18 & OSHA 1910.140

 

Brand

Metal Plus

Additional information

Weight 96 oz
Dimensions 8 × 7 × 4 in